Consulting Hotline
020-32397223
020-32397223
Company Fax
020-32397223
020-32397223
Cases
Force forklift - oil cylinder test system
Details
：
The test bed of this hydraulic cylinder meets the test requirements of GB/T 15622-2005 "hydraulic cylinder test method" and mechanical industry standard JB/T 10205-2010 "hydraulic cylinder".Automatic loading, PLC control, automatic computer data collection.The data collected by the computer can generate the test curve automatically, and the test report can be generated automatically after the printer is connected.
This product provides equipment conditions for testing the performance of hydraulic cylinder and the new process and materials of new hydraulic cylinder.
Product features
Quick and accurate internal leak test scheme;
External leakage test setting monitoring and automatic alarm function;
The system is equipped with high and low pressure separation module, ultra-high pressure hose, and once the pipeline is completed, all the experimental projects can be tested.
The system is equipped with the harway ultra high pressure and no leakage stop valve to eliminate the leakage of the system circuit.
The special oil cylinder is set up to start the pressure test circuit to accurately test the starting pressure of the cylinder.
Using power recovery mode, the power recovery of single and double acting cylinder can be realized.
The enclosed design of the hydraulic pump station can greatly reduce the noise of the system.
Automatic loading, PLC control, automatic computer collection data, high degree of automation;
The test report can be generated automatically, the test data can be printed and the test data can be stored automatically for later analysis and management.
The test data is measured with high precision and the detection accuracy is guaranteed.
The oil pump outlet sets high pressure strainer to ensure the oil cleaning degree and reduce the failure rate of the system;
The test system has its own fault diagnosis function, the system is stable, the security is high.
The test cylinder is used for oil cylinder stand, which is suitable for different test pieces.
Painted subjects cylinder installation by the gear rack mechanism to control the mobile, a setting bolt hole close to switch, using the hydraulic motor and hydraulic lock precise positioning (, to set hole pin cylinder insert the latch pin hole), a high degree of automation;
Taken the car in the way in which the participants cylinder (including the jack-up cylinder) to, on the car, lift automatically adjustable level, to adapt to the subjects of different diameter cylinder is installed, the clamping high degree of automation.
The main technical parameters of the test bed are shown below.
The total power of the system is 165KW
Oil cylinder stand size 11030 * 1200 * 1000 (subject to detailed design)
Main test system pressure 35MPa
System pressure test pressure 55MPa
The maximum reciprocating speed of oil cylinder is 210mm/s
Experiment maximum cylinder diameter 200mm
Test the maximum stroke of 2500mm
Fuel tank capacity: 1200L
Cooling water cooling system
Working medium 46 # anti-wear hydraulic oil
Working temperature of 0 ~ 80 ℃
Oil pollution ISO 19/16
Test instrument precision national standard B
Power supply AC380V
Control cabinet power AC220V
Sensor and control power DC24V
This product provides equipment conditions for testing the performance of hydraulic cylinder and the new process and materials of new hydraulic cylinder.
Product features
Quick and accurate internal leak test scheme;
External leakage test setting monitoring and automatic alarm function;
The system is equipped with high and low pressure separation module, ultra-high pressure hose, and once the pipeline is completed, all the experimental projects can be tested.
The system is equipped with the harway ultra high pressure and no leakage stop valve to eliminate the leakage of the system circuit.
The special oil cylinder is set up to start the pressure test circuit to accurately test the starting pressure of the cylinder.
Using power recovery mode, the power recovery of single and double acting cylinder can be realized.
The enclosed design of the hydraulic pump station can greatly reduce the noise of the system.
Automatic loading, PLC control, automatic computer collection data, high degree of automation;
The test report can be generated automatically, the test data can be printed and the test data can be stored automatically for later analysis and management.
The test data is measured with high precision and the detection accuracy is guaranteed.
The oil pump outlet sets high pressure strainer to ensure the oil cleaning degree and reduce the failure rate of the system;
The test system has its own fault diagnosis function, the system is stable, the security is high.
The test cylinder is used for oil cylinder stand, which is suitable for different test pieces.
Painted subjects cylinder installation by the gear rack mechanism to control the mobile, a setting bolt hole close to switch, using the hydraulic motor and hydraulic lock precise positioning (, to set hole pin cylinder insert the latch pin hole), a high degree of automation;
Taken the car in the way in which the participants cylinder (including the jack-up cylinder) to, on the car, lift automatically adjustable level, to adapt to the subjects of different diameter cylinder is installed, the clamping high degree of automation.
The main technical parameters of the test bed are shown below.
The total power of the system is 165KW
Oil cylinder stand size 11030 * 1200 * 1000 (subject to detailed design)
Main test system pressure 35MPa
System pressure test pressure 55MPa
The maximum reciprocating speed of oil cylinder is 210mm/s
Experiment maximum cylinder diameter 200mm
Test the maximum stroke of 2500mm
Fuel tank capacity: 1200L
Cooling water cooling system
Working medium 46 # anti-wear hydraulic oil
Working temperature of 0 ~ 80 ℃
Oil pollution ISO 19/16
Test instrument precision national standard B
Power supply AC380V
Control cabinet power AC220V
Sensor and control power DC24V